FoxFaceTop-Up Coming soon
Refrigerant top-up calculator

How much to add.
On the spot.

Put in the outdoor unit's pre-charge, the pipe length it covers and the grams per metre from its rating plate and manual, then the pipe length. Top-Up tells you how much refrigerant to add, in kg and grams, for any make and model.

Coming soon to theApp Store

£4.99, paid once. No account, no adverts.

iPhone
Any make
R32, R410A, R454B
Up to five rooms
Camera measuring
Works offline
What it does

Four steps, at the unit

The figures come off the rating plate and out of the manual. Top-Up does the sums.

FoxFace Top-Up: The unitFoxFace Top-Up: The pipe runFoxFace Top-Up: The answerFoxFace Top-Up: Saved
For air conditioning engineers

Checks the job, not just the sum

Put in the maker's limits and Top-Up checks the run against them as you go.

The run checked against the maker's limits

The longest pipe run, the longest run to one room, the height between the units and the most refrigerant the unit may hold.

  • A warning if anything is over a limit
  • The total charge and its CO2 equivalent
  • Whether that brings in F-Gas leak checks
Longest pipe runMaker's limit 25 m
0 mWithin
Height between the unitsMaker's limit 15 m
0 mWithin
Total chargeMost the unit may hold 1.40 kg
0 kgWithin
CO2 equivalentR32, GWP 675
0 tUnder 5 t
Add 0.117 kg of R32. No set F-Gas leak checks needed.

A report with every figure

A one-page report to share from your phone, and the wording for the unit's label ready to copy.

  • Where the pipe was measured, place by place
  • The sum, line by line
  • The label wording, ready to copy
FoxFace Top-Up: the one-page report
Why FoxFace Top-Up

No more scribbles on the box

On the side of the box

  • Find the grams per metre in the manual, every time
  • Work out the extra pipe by hand
  • Guess what the walls and floors add
  • Check the maker's limits from memory
  • Nothing written down for the label

FoxFace Top-Up

  • Save the unit once, one tap next time
  • Measure the run place by place
  • Walls and ceilings added for you
  • The run checked against the maker's limits
  • Label wording and a report ready to share
Price

Paid for once.

No subscription, no account and no adverts.

FoxFace Top-Up

£4.99 paid once

Buy it once and it is yours.

  • Single split and multi-split up to five rooms
  • R32, R410A and R454B
  • Measure the pipe run with the camera
  • The maker's limits checked
  • Label wording and a one-page report
  • Works with no signal
Coming soon
Questions

Good to know

Does it know my unit's figures?

No, on purpose. You put in the pre-charge, the length it covers and the grams per metre from the rating plate and installation manual, so it works for any make and model and never goes out of date. Save the units you fit most and they are one tap next time.

Which refrigerants does it cover?

R32, R410A and R454B.

Does it do multi-splits?

Yes, up to five rooms. Each indoor unit has its own pipe run.

Does it work with no signal?

Yes. Nothing you enter leaves your phone unless you share it.

Is it approved by a manufacturer?

No. FoxFace is not made by, linked to or approved by any manufacturer. You enter the unit's figures, you charge the system, and you are responsible for the result.

When is it out?

Soon. Email hello@foxface.io and we will tell you the day it is on the App Store.

FoxFace Top-Up app icon

Add the right amount, every time.

Coming soon to the App Store, for iPhone.

Coming soon to theApp Store